for more information, please visit the product page. ????????? cui .com 05/07/2015 1 of 4 series : pfr-2100 description: ac-dc hot-swap power supply model output voltage 1 output current output power 2,3 ripple and noise 4 effciency (vdc) max (a) max (w) max (mvp-p) typ (%) pfr-2100-400 400 5.125 2100 100 94 notes: 1. vout adjustable to 100~410 vdc. 2. at 100 vdc output, maximum of 512 w. 3. at 410 vdc output, maximum of 2101 w. 4. with 2000 f external capacitance features ? up to 2100 w continuous power ? constant current limited to 5.125 a ? blind mate connections for hot-swap ? power factor correction ? droop current sharing ? single i/o connector for ac input, dc output & signals ? remote on/off control, power good signal ? front panel led indicators ? efficiency up to 94% part number key base number reserved for custom confgurations pfr-2100 - 400 - cxx output voltage date page
for more information, please visit the product page. cui .com date 05/07/2015 page 2 of 4 cui inc series : pfr-2100 description: ac-dc hot-swap power supply input parameter conditions/description min typ max units voltage 180 264 vac frequency 50 60 hz current at 230 vac 10.7 a inrush current at 230 vac, 50 hz, half cycle, cold start, 25c 40 a leakage current 2.0 marms power factor correction at 230 vac 0.98 output parameter conditions/description min typ max units total regulation 2 % transient response 25% step load, recovery to 1% within 0.3 ms, slew rate 1a/s 4 % hold-up time at 115/230 vac, full load 20 ms status & control parameter conditions/description min typ max units remote enable active low enables main output, last-mate / frst- break enable pin current share passive droop with 1% regulation, external oring diode required (up to 12 units) vprog (adjustability) via 0 ~ 5.0 v signal for adjustment; unterminated default @ 100 vdc 100 410 vdc led indicator ac ok open collector, active high =good dc ok open collector, active high =good protections parameter conditions/description min typ max units over voltage protection 115 135 % over current protection 120 130 % over temperature protection output shut down, auto recovery safety & compliance parameter conditions/description min typ max units safety approvals ctuvus 60950-1 (pending), ce (pending) emissions fcc 15 sub part j, class a, en55022 class a, vcci class a harmonic compliance en61000-3-2 class d surges (mains) iec/en 61000-4-5 voltage dips/interruptions iec/en 61000-4-11 mtbf as per telcordia sr332, 40c, full load 400,000 hours rohs 2011/65/eu
for more information, please visit the product page. cui .com date 05/07/2015 page 3 of 4 cui inc series : pfr-2100 description: ac-dc hot-swap power supply environmental parameter conditions/description min typ max units operating temperature 0 50 c storage temperature -40 85 c mechanical parameter conditions/description min typ max units dimensions 11.50 x 5.20 x 2.50 (292.1 x 132.08 x 63.50 mm) inches cooling / airfow integral high performance 60 mm fan, air inlet at face; exhaust at connector input / output connector fci p/n 51939-377lf mates with fci 51940-263lf hot-swap capability fully hot-swappable, blind mate connector mechanical drawing units: inches [mm] tolerance: x.xx 0.02 [0.50] x.xxx 0.010 [0.25] input / output connector 1 pins function pins function pins function pins function pins function pins function pins function p2 -vout a1 reserved a2 dc_ok_l a3 reserved a4 otp a5 enable (return) a6 ref (ovp/ uvp test) p4 + vout b1 reserved b2 n/c b3 n/c b4 n/c b5 test-pin 5 b6 test-pin 3 p6 earth ground c1 logic return c2 reserved c3 n/c c4 n/c c5 n/c c6 test-pin 4 p8 ac neutral d1 ps present d2 ac_ok_l d3 v program d4 reserved d5 -ve sense d6 enable p10 ac line -- -- -- -- -- -- -- -- -- -- -- -- note: 1. power blades p1, p3, p5, p7 & p9 omitted for isolation
for more information, please visit the product page. date 05/07/2015 page 4 of 4 cui inc series : pfr-2100 description: ac-dc hot-swap power supply cui offers a two (2) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to be accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use. cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safet y or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 05/07/2015 the revision history provided is for informational purposes only and is believed to be accurate. revision history
|
